1.Before using the waste paper baler, be sure to keep the gear oil clean. Because the gear oil will be polluted by the external environment during the whole process of storage, or there may be errors and leaks, so you should always pay attention to the condition of the oil before refueling, and if any problems are found, they should be properly handled.
2.Before installing the waste paper baler, it is necessary to maintain the cleaning of the system software. Before installing the waste paper baler, it is necessary to carry out systematic cleaning. When cleaning, it is better to use the working oil or test running oil required by the hydraulic control valve, and it is not necessary to use gasoline, vehicle gasoline, ethanol, etc. Cleaning the oil tank cannot be cleaned with pure cotton yarn or pure cotton cloth. When cleaning, run the pump gap of the waste paper baler.
3.Before changing the oil, complete the cleaning of the waste paper baler. According to the adopted regulations, the gear oil of the waste paper baler should be replaced on time. Before replacing the new oil, all the system software must be cleaned up. After the cleaned oil is exported, the new oil is replaced, and the work can be started only after the test run.

Only by ensuring the above three points can reasonably lay a solid foundation for the long-term application of waste paper baler machinery and equipment.

NICKBALER Machinery waste paper baler is specially used for recycling and compressing waste corrugated boxes, cardboard, newspapers and other materials. At the same time can also be customized according to customer requirements. For details, please consult https://www.nickbaler.net