Product Description
NKW180Q paper hydraulic packaging machine is an efficient and environmentally friendly waste paper compressed equipment. It is mainly used to compress and pack paper waste, carton, cardboard and other paper wastes to facilitate transportation and processing. The machine adopts advanced hydraulic technology, which has the characteristics of high compression, high efficiency, and simple operation. It is widely used in paper mills, printing factories, packaging plants and other industries.
In addition,
NKW180Q paper Hydraulic Baler Machine also has the following characteristics:
-Weoly made of high -quality materials, strong durability;
-The compression pressure and compression volume can be adjusted as needed;
-It has automatic stop protection function, safe and reliable;
-The operation is simple and easy to maintain.
In short, NKW180Q paper hydraulic packaging machine is a superior and reasonable waste paper compression equipment, which is worthy of your trust and use.
|
Item
|
Name
|
parameter
|
|
mainframe
parameter
|
Bale size
|
1100mm（W）×1100mm（H）×～1600mm(L)
|
|
|
Material type
|
ScrapKraft paper, Newspaper, Cardboard ,Soft Film
|
|
|
Material density
|
700～800Kg/m3（Moisture 12-18%）
|
|
|
Feed opening size
|
2400mm×1100mm
|
|
|
Main motor power
|
37.5*2KW+15kw
|
|
|
Main cylinder
|
YG280/220-2900
|
|
|
Main cylinder force
|
180T
|
|
|
Capacity
|
22-25T/H
|
|
|
Max. system working force
|
30.5MPa
|
|
|
Mainframe weight(T)
|
About 28 tons
|
|
|
Oil tank
|
2m3
|
|
|
Mainframe size
|
About 11×4.3×5.8M（L×W×H）
|
|
|
Tie wire line
|
5 line φ2.75～φ3.0mm3 iron wire
|
|
|
Pressure time
|
≤30S/ (go and back for empty load)
|
|
Chain conveyor technology
|
Model
|
NK-III
|
|
|
Conveyor weight
|
About 7 tons
|
|
|
Conveyor size
|
2000*12000MM
|
|
|
terra hole size
|
7.303M（L）×3.3M（W）×1.2M（deep）
|
|
|
Conveyor motor
|
7.5KW
|
|
Cool tower
|
Cool tower motor
|
0.75KW（water Pump）+0.25（Fan）
|
About Us
Nick machinery specialized in hydraulic machinery，Hydraulic Baling Machine for Waste Material, baler application, waste paper Balers ,baling machine, baling press, recycling baler, Baling Presses & Balers, hydraulic baling press, baler, balers and also shredder ,crusher , Double Shaft Shredder,Tyre Crusher,Shredder,Copper Wire recyclingMachine, Heavy Crusher ect ,packaging machinery equipmentdevelopment, production, sales, service as one of the environmental protection products company, Our products are mainlyabsorbing Germany ,European and Americantechnology, products has already exported more than 60 countriesand regions at home and abroad. The company adhering to the "To change made- in-China in the international market influence" of the target as the prerequisite, to ensure that the "Products service maximization,Customer benefit maximization" asthe enterprise production policy， mainly on waste paper, waste plastics, scrap metal, fiber, agricultural straw recycling industry,it‘s for enterprise to providing convenient,fast, safe and economic solutions,now we have after-sales service center like India, Dubai, Australia, the United States and so on and well received by users.
Video
FAQ
Q1. What is the low pressure or low pressure of the hydraulic system?
The oil pump motor turns wrong, the overflow valve core card is dead, the unloading electromagnetic valve core card is not moved, the amount of hydraulic oil is too small, the oil pump cannot suck the oil, or the pressure gauge is damaged. The corresponding solution is to rotate the windshooting of the outer at the time of overlooking the motor. If the reversal, the power supply should be replaced; check and clean the valve core, if damaged, it needs to be replaced; to ensure that the amount of hydraulic oil is sufficient; , Need to replace a new pressure gauge.
Q2. Why can't the machine start normally?
The possible reason is that the power cord is in poor contact or the switch is damaged. The solution is to check whether the power cord connection is good. If you have any problems, you need to connect or replace the power cord; if the switch is damaged, the switch needs to be replaced.
Q3. What should I do if there is noise during the compression process?
The possible reason is that the old compression is left in the compression cavity, which needs to be cleaned up.
Q4. What is the reason why the compressed effect is not ideal?
The possible reason is that the compression is not strong enough, and the compression force needs to be adjusted; or the compression cavity is seriously wear, and the compressed cavity needs to be replaced.
Related Product
Message Us
