Scrap metal baler: mainly used in recycling processing industry and metal smelting industry.
Various metal scraps, steel shavings, scrap steel, scrap iron, scrap copper, aluminum scrap, aluminum shavings, dismantled car shells, waste oil drums and other metal materials can be extruded into various shapes of qualified materials such as cubes and cylinders. . Easy to store, transport and recycle. Precautions for the new machine running-in period of scrap metal baler Always keep the scrap metal baler body clean, adjust and loosen the loose parts in time to prevent the parts from being worn out or the parts being lost due to looseness. Before using the new waste paper baler, you should always check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water), and check the tightness of the scrap metal baler. At the same time, it is necessary to strengthen the lubrication of each lubrication point. It is recommended to fill the lubrication point with grease every shift during the running-in period. Pay attention to the instruments of the scrap metal baler equipment. If it is abnormal, stop it in time to eliminate it. When the running-in period is over, the machine should be forced to support, check and adjust the work, and pay attention to the exchange of oil. Pay attention to the working load during the running-in period. The working load during the running-in period should not exceed 80% of the rated working load, and the appropriate workload should be deployed to prevent the overheating caused by the long-term operation of the machine.
