WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
How to test the automatic waste paper baler before use?
Author : admin Time : 2021-04-08 AllPageView : 348
Share:
What methods can the automatic waste paper baler use to check whether the equipment is normal before it is produced, and how to operate it? Now let's give you a specific explanation:
1. No-load test machine: turn on the power of the waste paper hydraulic baler, loosen the system overflow valve to make the system overflow smoothly, start the motor (using the method of stopping after starting), and observe whether the rotation of the motor is consistent with the sign of the oil pump . Start the motor and observe whether the oil pump is stable and reliable during operation. Whether there is significant noise in the pump, if not, the test machine can be carried out. Gradually adjust the overflow valve handle of the waste paper hydraulic baler so that the pressure value is about 8Mpa. Operate according to the operating sequence, and perform single-action on each cylinder to observe whether it runs smoothly and without vibration, and gradually adjust the main pressure cylinder and side pressure The parallelism between the cylinder, the bottom plate and the side frame, fix the main pressure cylinder and the side pressure cylinder, and use the adjusting support to support the tail of the cylinder.

Automatic waste paper baler

2. Load test machine
(1) The load test can be carried out after the single-cylinder operation is recognized.
(2) Adjust the pressure of the waste paper hydraulic baler system to make the pressure display value about 20~26.5Mpa, and tighten the nut. Do several packing sequences in the order of manipulation. Feed material to the compression chamber, and use the form of packaging for the load test. Press 1~2 bales and hold the pressure for 3~5 seconds after the stroke of each waste paper hydraulic baler cylinder is in place. Do a pressure test on the system and observe if there is any Oil leakage, if any, should be eliminated after the system is depressurized.
Nick Machinery has a professional R&D, design and after-sales team. If you encounter any difficult problems during use, you can always contact us www.nkbaler.com.
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com  Nickbaler888@gmail.com
WhatsApp:008615021631102 
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top