1. Before starting the machine, please add lubricating oil regularly, fixedly and quantitatively according to the lubricating chart. The lubricating oil should be clean and free of precipitation. Insist on dripping appropriate amount of lubricating oil and clean the blade surface to improve the wear resistance of the blade surface.
2. In the process of use, it is necessary to order people to strictly follow the "Scrap Shearing Machine Operating Regulations" to stop the operation, and to use the blades correctly. Normally, people must leave the machine and stop, and the operators must be trained before returning to work.
3. The blade must always be cleaned and coated with anti-rust oil. The spare blade should be stored in a cool and dry central storage. In order to prevent the blade from rusting, a layer of anti-rust oil should be applied to the blade that has been opened. The boring center ensures that the blade is not corroded.
4. Regularly check the wear and tear of the blade. If the blade is severely worn, it should be replaced in time and reported to the spare parts for supplement.
5. 10 minutes before the end of get off work every day, stop scrubbing and cleaning the blades and add oil to them. It is necessary to maintain a clean state at all times. Pay attention to avoid rust in the center without paint, and do a good job of quality work on the switch regularly.

6. During the blade transportation, you should choose a sturdy wooden box for storage, and wrap the outside with foam plastic to avoid displacement and collision during transportation. The outside of the box should be marked with "vulnerable parts" to attract attention. When unBaler the box in the workshop, use iron tools to pry and smash the wooden box to avoid damaging the cutting edge of the blade.

NICKBALER hydraulic shearer has smooth action, convenient and sensitive operation. htttps://www.nkbaler.net