The cleaning of the internal hydraulic system of the waste paper box balers is often effective for the right or wrong of the waste paper box balers, because the waste paper box balers need an outstanding hydraulic system when they work. Therefore, in daily work, the cleaning work of the baler should not be underestimated. Large waste paper box baler manufacturers must take it seriously. Below, let's take a look at the precautions for cleaning the waste paper baler:
The first thing is to use low-viscosity special cleaning oil. When cleaning, add the oil to the oil tank of the waste paper box baler and heat it to 50-80 degrees Celsius. Start the hydraulic pump and let it run dry. When cleaning, you must often tap the tube gently. The intention of this is to receive the effect of removing the attachments. Clean the oil filter for 20 minutes to check the contamination of the oil filter, and clean the filter, then clean it again, and repeat until it is filtered. Stop when there are not many pollutants on the Internet. The cleaning time of the waste paper box baler is usually 2 hours. For the messy hydraulic system, each area can be cleaned according to the working area. The hydraulic cylinder can also be connected to allow the hydraulic cylinder to reciprocate for system cleaning.
After cleaning, the cleaning oil must be drained as much as possible. The cleaning of the hydraulic system inside the waste carton baler is very useful for the waste carton baler, because the waste carton baler needs an outstanding Hydraulic system. Therefore, in daily work, the cleaning of the baler should not be underestimated and must be taken seriously.

The above is what Nick Machinery summarized for you on how to clean the baler. Is it helpful to everyone? For more information about the waste paper box baler, please pay attention to www.nkbaler.net