For the semi-automatic baler, its baling has two modes, the first is: manual mode, in which the bale action is triggered by manual operation; the second is, in the automatic mode, the bale actions are triggered by the packet length counter. Today we mainly discuss the second bundle mode:
When the measured value of the baling machine length counter is equal to the set value, a trigger signal will be output, and the automatic baling machine process will start when the push plate extends .to the front limit position and stops.
1. The wire hooking machine (hook device) pulls the wire on the opposite side of the machine, in other words, pulls the wire on both sides together.
2. After the wire bundle box is automatically aligned, push the front wire to the center of the wire bundler.
3. Then the wire is automatically twisted and cut.
4. Push the boxes back to their original positions.

5. The bundle is complete.

For more knowledge about balers, please follow NICKBALER https://www.nickbaler.net