In today's society,metal is needed for building houses,metal for bridges,metal for car building,and metal for pots and pans.Metal has become an irreplaceable element in people’s lives.However,the metal mineral resources provided by nature to humans are limited.Mining a little is a little less.Humans need to extract a huge amount of metal every year.It will not take long for this amount of mining to deplete the minerals that can be mined in nature.At present,in many fields,metals have become scarce,and metals are recycled.Must be taken seriously,and the metal baler came into being.

The metal baler can squeeze all kinds of metal scraps,steel shavings,scrap steel,scrap aluminum,scrap copper,scrap iron and other qualified furnace materials in various shapes such as rectangles,cylinders,and octagons to reduce transportation and torch costs.

The metal baler can reduce the production cost of metal products,reduce metal pollution to the environment,turn waste into treasure,and have considerable economic benefits.
Nick Machinery is a manufacturer specializing in the production of metal balers,metal scrapers, and waste paper balers.With many years of production experience,our products have experienced the test of the market and are your best choice for investment in metal baler projects.please visit our website:www.nkbaler.net,or call:86-29-86031588

2020-11-18

The animal husbandry that my country is currently vigorously developing is an important manifestation of the realization of agricultural modernization.
The development trend of animal husbandry is to carry out deep processing of forage grass,and the recycling of crop forage grass requires green storage baler to achieve. Through the green storage baler,the forage is packaged and converted into feed for the animal husbandry industry.Rich feed.

At present,the production capacity and storage of forage in my country are increasing year by year,which effectively promotes the development of animal husbandry production. The application of green storage baler is gradually increasing,and the scope of application is also gradually expanding.

Forage grass is recycled and processed as feed,which changes the traditional feeding method.The livestock eats the forage grass package produced by the green storage and baler,which is more convenient and quick,and directly selects one package for feeding,which saves a lot of space for storing forage.
In the past,there was less forage stored in the forage house,because the forage was relatively fluffy,not easy to take out,and it was easy to deteriorate due to moisture.It takes a lot of energy to store feed,and it must be kept by a special person.Now the green storage baler is used for easy removal and storage,which saves a lot of time for the livestock industry.

Nick brand green storage forage baler is safe and reliable,low power consumption,economical and reasonable,easy to use,simple to maintain and operate.It is a good helper for your production.

If you are interested or have questions about the green storage baler,please visit our website:www.nkbaler.net,or call: 86-29-86031588

2020-11-18

For the straw baler,if the hydraulic oil needs to be replaced after the equipment is installed or used for a long time,the hydraulic system must be cleaned.What should be paid attention to when cleaning hydraulic system?Next,Nick Machinery will briefly introduce it.
1.Organize environmental sites.
2.Choose to use low-viscosity special cleaning oil.When cleaning,add the oil to the oil tank of the hydraulic baler and heat it to 50-80 degrees.

3.Start the hydraulic pump and work idling.When cleaning,you should often tap the tube gently to remove the attachments.Clean for about 20 minutes to check the contamination of the oil filter,clean the filter,and then clean again,repeat the operation,Stop until there are no contaminants.

4.For a more complex hydraulic system,it can be cleaned according to the working area,or it can be directly connected to the hydraulic cylinder and let the hydraulic cylinder reciprocate for system cleaning.
5.After cleaning,drain the cleaning oil,clean the inside of the oil tank,and then remove the temporary cleaning line to ensure recovery to normal working conditions,and add hydraulic oil.

Nick brand straw baler is safe,reliable,low power consumption,economical and reasonable,easy to use,simple to maintain and operate.It is a good helper for your production.

Please visit our website:www.nkbaler.net,or call: 86-29-86031588

2020-11-17

The briquetting machine is specially used for compressing wood chips,wood flour,shavings,coconut mud,peanut husks,corn stalks and other materials.The rice husk briquetting machine is a briquetting machine for compressing rice husks,which can squeeze the rice husks into blocks.Convenient for transportation and storage.
Operation process of rice husk briquetting machine
1.The rice husk is fed to the compression box of the equipment through the hopper,belt conveyor,and screw conveyor.

2.It is squeezed horizontally by the horizontal cylinder of the equipment.

3.After the second longitudinal extrusion of the longitudinal oil cylinder of the equipment,the cuboid is packed.
4.Then push the compressed rice husk block into the bag by pushing the bag cylinder.
The process of rice husk briquetting machine is relatively simple,pay attention to safety when operating.

Nick rice husk briquetting machine is fully automatic operation,continuous delivery,fast speed,and particularly convenient to use.

please visit our website:www.nkbaler.net,or call:86-29-86031588

2020-11-17

The bagging machine is mainly suitable for the compression of corn cobs,straws,wood chips,rice husks,cottonseed husks,peanut husks and other scraps.The bags are directly bagged after compression,which is convenient for storage and reduces production costs.

The bagging machine is a fully automatic high-efficiency hydraulic baler newly developed by Nick Machinery,with a high degree of automation.This equipment has low failure rate,high pressure,stable operation and simple operation.The structure is reasonable,firm,easy to use and maintain,which greatly improves productivity and reduces energy consumption and costs.

The equipment of other manufacturers can also work normally under the low moisture content state where the equipment of other manufacturers cannot be pressed normally,and it is very suitable for use with the automatic feeding system.It can also be designed and manufactured according to the compressed size required by the customer.
Welcome friends from all over the world to come to consult and purchase.Company website:www.nkbaler.net,Tel:86-29-86031588

2020-11-16